Anna Dollár, P.S. Steif, Enhancing Traditional Classroom Instruction with Web-based Statics Course, 2007 Frontiers in Education, Milwaukee, Wisconsin, October 2007.

Anna Dollár, P.S. Steif, An Interactive Online Course on Engineering Statics, International Conference on Engineering Education - ICEE 2007, Coimbra, Portugal, September, 2007.

Besselink, B., Amit Shukla, Fey, R., and Nijmeijer, H., "Classification of periodic solutions in a single degree-of-freedom system with backlash", accepted for the Proc. of ASME International Design Engineering Technical Conferences, Las Vegas, September 2007.

Beal, J., Amit Shukla, Brezhneva, O. and Abramson, M.A., Optimal sensor placement for structural health monitoring, Optimization and Engineering, In Press (Accepted May 2007).

Kumar Singh, Srinivas, G., Amit Shukla, and Pang, S.S., "Detection of miniscule changes in structures from spectral data", Proc. of the SPIE, 14th Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, March 18-22, 2007, San Diego, California.

Amit Shukla, Gordon, R.W., and Hollkamp, J.J., Nonlinear Dynamics of a Post-buckled Beam: A Parametric Space Investigation, Proc. of International Modal Analysis Conference, February 2007, Orlando, Florida.

Heather White, Neal Birchfield, Brezhneva, O.A., and Amit Shukla, Parametric Effects on the Periodic Response of a Discontinuous Dynamical System: an Experimental and Numerical Investigation, Proc. of International Modal Analysis Conference, February 2007, Orlando, Florida.

Ranatunga, V. and Amit Shukla, "Nonlinear dynamics of a rotational system with discontinuous impact", Proc. of International Modal Analysis Conference, February 2007, Orlando, Florida.

Jafri, F.A., Amit Shukla and Thompson, D.F., "A numerical bifurcation study of friction effects in a slip-controlled torque converter clutch". Nonlinear Dynamics (Special Issue on Discontinuous Dynamical Systems), Accepted August 2006, Published Online January 2007, to be Published in November 2007 issue.

Jeong-Hoi Koo and M. Ahmadian, "A Comprehensive Off-Tuning Analysis of Damping Controlled Tuned Vibration Absorbers," Proceedings of International Mechanical Engineering Congress and Exposition 2006, Paper No IMECE2006-15238, November 5-10, 2006, Chicago, IL USA.

Jeong-Hoi Koo and Amit Shukla, "Nonlinear Dynamics of a Clamped, Buckled Plate: Some Results," Proceedings of International Mechanical Engineering Congress and Exposition, November, 2006, Chicago, IL.

Jeong-Hoi Koo and Erin Ritchie, "Development of Electromagnetic Induction Systems for Powering 'Smart' Actuation Systems," Proceedings of International Mechanical Engineering Congress and Exposition, November, 2006, Chicago, IL.

Kumar Singh and S.S. Pang, "Direct and Inverse Eigenvalue Problems towards the Design and Identification of Mass-Loaded Micro-Resonators," Proceedings of the 2006 International Mechanical Engineering Congress and Exposition (IMECE - 2006), American Society of Mechanical Engineering (ASME), 1-11, November 2006, Chicago, IL.

Anna Dollár, P.S. Steif, An Interactive Cognitively Informed On-Line Statics Course, 2006 Frontiers in Education, San Diego, California, October 2006.

Anna Dollár, P.S. Steif, Web-Based Statics Course, The Ninth IASTED International Conference on Computers and Advanced Technology in Education, CATE 2006, Lima, Peru, October 2006.

Jeong-Hoi Koo, Amit Shukla and Ahmadian, M., "Dynamic performance analysis of nonlinear tuned vibration absorbers", Communications in Nonlinear Science and Numerical Simulation, Accepted September 2006. In Press.

S.W. Cho, Jeong-Hoi Koo, J.S. Jo, and I.W. Lee, "Vibration Control of a Cable-stayed Bridge Using Electromagnetic Induction Based Sensor Integrated MR Dampers," Proceedings of the 8th International Conference on Motion and Vibration Control (MOVIC 2006), August, 2006, Daejeon, Korea.

Jeong-Hoi Koo, Amit Shukla and M. Ahmadian, "Dynamic Performance Analysis of Nonlinear Tuned Vibration Absorbers," Proceedings of the 1st International Conference on Nonlinear Science and Complexity (NSC 2006), August, 2006, Beijing, China.

Jeong-Hoi Koo, M. Setareh, J.K. Ritchey, M. Ahmadian, and T.M. Murray, "Application of a Semi-Active Pendulum Tuned Mass Damper for Floor Vibration Control," Proccedings of the 4th World Conference on Structural Control and Monitoring, July, 2006, San Diego, CA.

Jeong-Hoi Koo and M. Ahmadian, "Qualitative Analysis of Magneto-Rheological Tuned Vibration Absorbers: Experimental Approach," Proceedings of the 10th International Conference on Electrorheological Fluids and Magnetorheological Suspensions, June, 2006, Lake Tahoe, NV USA.

F. Goncalves, Jeong-Hoi Koo and M. Ahmadian, "A Review of the State of the Art in MR Fluid Technologies - Part I: MR Fluid and MR Fluid Models" The Shock and Vibration Digest, Vol 38, No 3, May 2006, 203-219.

G.K. Srinivas, Kumar Singh, G. Li, and S.S. Pang, "Identification of composite beam delamination parameters," Composites Division, ANTEC 2006 Charlotte Conference Proceedings, Society of Plastics Engineers, Charlotte, May 2006.

Michael Bailey-Van Kuren, “Flexible robotic demanufacturing using real time tool path generation”, Journal of Robotics and Computer-Integrated Manufacturing, 22 (2006), 17-24.

Michael Bailey-Van Kuren, "Surface Feature Identification Using a Vision Based Manifold for Robotic Demanufacturing" ASME Journal of Manufacturing Science and Engineering, vol. 128 issue 2, 2006, 523-530.

Fazeel Khan, "Loading History Effects on the Creep and Relaxation Behavior of Thermoplastics," Journal of Engineering Materials and Technology, 128, 2006, 564-571.

Fazeel Khan and E. Krempl, "Amorphous and Semi-Crystalline Solid Polymers: Experimental and Modeling Studies of their Inelastic Deformation Behavior," Journal of Engineering Materials and Technology, 128, 2006, 64-72.

Fazeel Khan, "Recovery behavior of polymers: Experimental results and modeling," Proceedings of the International Symposium on Plasticity 2006.  Ed. A. Khan, Halifax, Nova Scotia.

Jeong-Hoi Koo, F. Goncalves and M. Ahmadian, "A Comprehensive Response Time Analysis of Magneto-Rheological Fluid Dampers", Smart Materials and Structures, 15 (2006), pp 351-358.

Kumar Singh and Y.M. Ram, "A transcendental inverse eigenvalue problem associated with longitudinal vibrations in rods," AIAA Journal, Vol 44 (2), 317-322, 2006.

G. Li, D. Maricherla Kumar Singh, S.S. Pang, and M. John, "Effect of Fiber Orientation on Structural Behavior of FRP Wrapped Concrete Cylinders," Composite Structures, Vol 74 (4), 475-483, 2006.

Kumar Singh, G. Li, and S.S. Pang, "Free vibration and Physical Parameter Identification of Non-uniform Composite Beams," Composite Sturctures, Vol 74 (1), 37-50, 2006.

Amit Shukla and Jeong-Hoi Koo, "Detection of Debonding in a Tile-based Thermal Protection System via Change in Stiffness using Continuation Methods," Proceedings of SPIE (Smart Structures and Materials/NDE 2006), March, 2006, San Diego, CA.

J.J. Nagel, G. Mikhail, M. Noh and Jeong-Hoi Koo, "Magneticallly Actuated Micropumps using a Fe-PDMS Composite Membrane," Proceedings of SPIE (Smart Structures and Materials/NDE 2006), March, 2006, San Diego, CA.

S.W. Cho, J.S. Jo, J.E. Jang, Jeong-Hoi Koo and H.J. Jung, "A Smart Passive Damping System for Stay Cables," Proceedings of SPIE (Smart Structures and Materials/NDE 2006), March, 2006, San Diego, CA.

P.R. von Lockette, J. Kedlowec and Jeong-Hoi Koo, "Particle Mixtures in Magnetorheological Elastomers (MREs)," Proceedings of SPIE (Smart Sturctures and Materials/NDE 2006), March, 2006, San Diego, CA.

Jeong-Hoi Koo, M. Ahmadian and M. Setaraeh, "Experimental Robustness Analysis of MR Semi-Active Tuned Vibration Absorbers Subject to Mass Off-tuning" Journal of Vibration and Acoustics - Transactions of the ASME, Vol 128, February 2006, pp 126-131.

Kumar Singh, A.P.S. Sawhney, N. Sachinvala, G. Li, S.S. Pang, B. Condon, and R. Parachuru, "Applications and future of Nanotechnology in Textiles," Beltwide Cotton Conferences, San Antonio, TX, January 2006; also appeared in the Proceedings of the Beltwide Cotton Conferences, National Cotton Council of America, 2497-2503, 2006.

A.P.S. Sawhney, Kumar Singh, N. Sachinvala, G. Li, S.S. Pang, and B. Condon, "Successful Size-Free Weaving of Cottom Yarns on a Modern High-Speed Machine: A Progress Report," Beltwide Cotton Conference, San Antonio, TX, January 2006; also appeared in the Proceedings of the Beltwide Cotton Conferences, National Cottom Council of America, 2491-2496, June 2006.

Jeong-Hoi Koo, Fernando Goncalves and Hang Zhang, “Introducing advanced tuned vibration absorber in an undergraduate vibrations course”, Proceedings of the 2005 ASME International Mechanical Engineering Congress and Exposition, Nov 2005, Orlando, Florida.

Eric Williams, Mohammad H. Elahinia, and Jeong-Hoi Koo, “ Control of a tuned vibration absorber based on SMA wires”, Proceedings of the 2005 ASME International Mechanical Engineering Congress and Exposition, Nov 2005, Orlando, Florida.

Hong Zhang and Jeong-Hoi Koo, “ Development of a wearable gesture recognition system”, Proceedings of the 2005 ASME International Mechanical Engineering Congress and Exposition, Nov 2005, Orlando, Florida.

Paris R. von Lockette, Jennifer Kadlowec and Jeong-Hoi Koo, “ Development of tunable vibration absorbers using magnetorheological elastomers with bimodal particle distribution”, Proceedings of the 168^th Technical Meeting of Rubber Division, American Chemical Society, Pittsburgh, PA, Nov 2005.

Amit Shukla and Jeong-Hoi Koo, “Control bifurcations in a nonlinear active suspension system for system design”, Proceedings of the 2005 ASME International Mechanical Engineering Congress and Exposition, Nov 2005, Orlando, FL.

Paloma Mejia and Amit Shukla, “Model based damage detection in an automotive exhaust hanger component”, Proceedings of the 2005 ASME International Mechanical Engineering Congress and Exposition, Nov 2005, Orlando, FL.

Amit Shukla, “Control bifurcations of a magnetorheological fluid based active suspension system”, Proceedings of the 2005 ASME International Design Engineering Technical Conferences, Sept 2005, Long Beach, CA.

Amit Shukla, “Nonlinear dynamics of interconnected structures –application to DNA dynamics”, Proceedings of the 2005 ASME International Design Engineering Technical Conferences, Sept 2005, Long Beach, CA.

P.S.Steif, A. Dollár , “Reinventing The Teaching Of Statics”, International Journal of Engineering Education, Vol. 21, No. 4, pp 723-729, 2005

A. Dollár , P.S.Steif, “ Learning Modules for Statics”, International Journal of Engineering Education, in press; interactive online paper: www.ijee.dit.ie/OnlinePapers/Interactive/Statics/Learn_Modules_Statics_Dollar_Steif.pdf

P.S.Steif, A.Dollár , John A. Dantzler, “Results from a Statics Concept Inventory and their Relationship to other Measures of Performance in Statics”, accepted to 2005 Frontiers in Education, Indianapolis, IN, October 2005

Michael Bailey-Van Kuren and Donna Scarborugh, “Mechatronic applications in peridatric therapy devices”, Proceedings of IEEE/ASME International Conference on Advanced Intelligent Mechatronics, pp 570-575, July 24-28, Monterey, CA.

Michael Bailey-Van Kuren, “A projector-vision system for automated demanufacturing”, Proceedings of IEEE/ASME International Conference on Advanced Intelligent Mechatronics, pp 207-212, July 24-28, Monterey, CA.

Michael Bailey-Van Kuren and Justin Soltani, “An intelligent disassembly assistant for man-machine demanufacturing”, Proceedings of IEEE/ASME International Conference on Advanced Intelligent Mechatronics, pp 1109-1113, July 24-28, Monterey, CA.

Michael Bailey-Van Kuren, Stephanie Gillette, Paloma Mejia, Tim Stoever and Andrew Walker, “Design considerations for a wearable pediatric rehabilitative boot”, Proceedings of IEEE 9^th Conference on Rehabilitation Robotics, pp 400-403, June 28-July 1 2005, Chicago, IL.

A.Dollár , P.S.Steif, “Sharpening Statics as a Tool for Design: Demystifying the Modeling of Forces at Supports and Connections”, American Society for Engineering Education Annual Conference & Exposition, Portland, June 2005

James C. Moller, “Prediction of rake and flank temperature distributions during wet and dry machining”, Transactions of NAMRI/SME, pp 405-412, Vol. 33, 2005.

Michael Bailey-Van Kuren and Amit Shukla, “System design for isolation of a neonatal transport unit using passive and semi-active control strategies”, Journal of Sound and Vibration, pp 382-394, Vol. 286, 2005.

Amit Shukla and David F. Thompson, “An investigation of the effect of feedback on the bifurcation stability of a nonlinear servohydraulic system”, International Journal of Fluid Power, pp 37-46, Vol. 6, 2005.

A. Dollár, P.S. Steif, Reinventing the Teaching of Statics, 2004 American Society for Engineering Education Annual Conference & Exposition, Salt Lake City, June 2004 (Mechanics Division Best Session Presentation Award).